Designing, Fitting and Servicing Oil heating systems is a core service that we have been offering for more than 25 years – we have an established reputation for quality, service, and customer satisfaction.
One of the keys to a good heating system is a good boiler. We are one of the few Gold Accredited Installers for the Worcester Bosch Group and their range of products is one which we recommend that you can trust for quality and reliability.
We will install with a 7 year guarantee as standard – 8 years with a System Filter
As with the Gas range of boilers there are 3 types of Boilers
With oil you have the added option of either internal or external types. The external option saving valuable space in the smaller kitchen or house;
Combi Boilers
A combination or ‘combi’ boiler is both a high efficiency water heater and a central heating boiler in a single compact unit. Combi boilers heat water directly from the mains when you turn on a tap, so you won’t need a hot water storage cylinder or a cold water storage tank in the roof space.
They are also very cost-effective and energy-efficient as water is heated instantly rather than being heated and then stored in a cylinder. An added benefit is that hot water is delivered at mains pressure, which means that you could get a powerful shower without the need for a separate pump.
System Boilers
System boilers require a cylinder for storing hot water, however the major heating and hot water system components are built into the boiler itself, making it quicker and easier to install. In addition, there is no need for a tank in the loft, so it can be an option in a home with little or no loft space or where the space is earmarked for a conversion.
These boilers are also compatible with solar water heating systems, which deliver environmental benefits as well as lower energy bills.
Regular Boilers
Regular boilers (sometimes known as traditional, conventional or heat only boilers) are ideally suited to homes that already have a traditional heating and hot water system which is linked to a separate hot water cylinder. These boilers also need a cold water storage tank in the loft to feed the hot water cylinder as well as a tank that maintains the water level of the central heating system.
A regular boiler may be the best option for replacing an existing boiler if the property has an older radiator system, as it might not be able to cope with the higher water pressure that is delivered by system or combi boilers.
Product | Type | Fuel | House | Comment |
Greenstar Heatsalve 11 | Combi | Oil | Small / Med | Fits unders standard kitchen worktop |
Greenstar Heatsalve 11 External | Combi | Oil | Small / Med | Installed outside freeing up space inside |
Greenstar Danesmoor System | System | Oil | Med / Large | No need for separate pump or loft tank |
Greenstar Danesmoor System Utility | System | Oil | Med / Large | No need for separate pump or loft tank |
Greenstar Danesmoor System External | System | Oil | Med / Large | Installed outside freeing up space inside |
Greenstar Danesmoor Regular | Regular |
Oil | Med / Large | Traditional open vent that includes stored hot water |
Greenstar Danesmoor Regular Utility | Regular |
Oil | Med / Large |
Concealed boiler controls - perfect for families with youngsters |
Greenstar Danesmoor Regular External | Regular |
Oil | Med / Large | Installed outside freeing up space inside |
Greenstar Danesmoor Utility |
Regular | Oil | Large / Commercial | Perfect for homes / businesses with a high heating and hot water requirement |
Greenstar Heatslave II
The UK's most popular oil combi boiler.
This boiler has a sleek, modern design and is suitable for small, medium and large sized homes with one or two bathrooms.
Greenstar Heatslave II External
Has the same features as the internal model.
This boiler is suitable for small, medium and large sized homes with one or two bathrooms and is installed outside which frees up space within your home. The boiler is contained in a robust cabinet that protects the boiler in all weathers.
Greenstar Danesmoor System
Perfect for small, medium and large sized homes with a heating system that includes stored hot water.
Greenstar Danesmoor System Utility
Perfect for small, medium and large sized homes with a heating system that includes stored hot water.
Greenstar Danesmoor External System
Same features as the internal model.
This boiler is suitable for small, medium and large sized homes and is installed outside which frees up space within your home. The boiler is contained in a robust cabinet that protects the boiler in all weathers.
Greenstar Danesmoor Regular
Perfect for small, medium and large sized homes with a traditional open vent heating system that includes stored hot water.
Greenstar Danesmoor Utility Regular
Perfect for small, medium and large sized homes with a traditional open vent heating system that includes stored hot water.
Greenstar Danesmoor External Regular
Our Greenstar Danesmoor External boasts the same features as the internal model. This boiler is suitable for small, medium and large sized homes and is installed outside which frees up space within your home. The boiler is contained in a robust cabinet that protects the boiler in all weathers.
Greenstar Utility Regular
Perfect for keeping the largest of homes and light commercial properties warm, and with a concealed control, this boiler is perfect for installation in your utility area or a boiler room.
The Greenstore range of hot water cylinders by Worcester Bosch perfectly complements the Greenstar system of regular boilers.
A cylinder is simply a tank that will store your hot water and pass it through taps and showers when required.
You can choose from two types of cylinder.
With a 25 year guarantee, Greenstore Worcester Bosch cylinders are manufactured by Bosch ensuring the highest quality. They are made with 100% recyclable components helping you to protect the environment.
Greenstore unvented cylinders from Worcester Bosch offer significant performance improvements over traditional cylinders.